Dishwasher Guide

Dishwasher Won't Start: Door Latch, Control Lock and Power Faults

A dishwasher that won't start usually falls into one of two groups: nothing happens at all, or the lights come on but the cycle never begins. Those two symptoms point at different causes, so sort out which one you have before you start checking things.

Several of the common causes take under a minute to check.

No lights at all vs. lights but no cycle

  • No lights, no sound: a power problem. Think of the breaker, the outlet or hardwired supply, the door latch switch or a blown thermal fuse.
  • Lights on, no cycle: a control setting such as control lock or delay start, a door that isn't fully latched or a control board that isn't getting the signal to start.
  • Starts, hums and stops: a different fault, often water or pump related. See our guides on draining or leak codes.

Quick checks: control lock, delay start and door

  • Check the control lock. Many panels have a lock that disables the buttons until you hold a key for a few seconds. Your manual shows which button.
  • Check for a delay start or timer setting that's still active.
  • Open the door and close it firmly. If the latch doesn't engage, the machine won't start. Look for a bent latch, an obstructed door or a rack or dish sticking out.
  • Try a reset. Many dishwashers reset when you switch the breaker off for a minute and back on. Check your manual for a button-based reset.

Power supply and breaker

Check that the breaker hasn't tripped. Dishwashers are often on their own circuit, sometimes shared with the garbage disposal. If the breaker trips again right away, don't keep resetting it. That points to a short, and the machine needs to be checked.

Door latch switch faults and fixes

The machine will only start when the door switch confirms the door is closed. A worn or broken latch or switch can leave a dishwasher that looks fine but won't respond. If you can see the latch is damaged or the door never clicks, that's a likely cause.

Control board and thermal fuse (technician diagnosis)

If the basics check out, the cause is often a thermal fuse, a failed user interface or the main control board. Testing these needs a multimeter and access behind the panel, and it's best left to a technician. Boards sometimes fail after a leak or power surge, and our guide on the Electrolux dishwasher control panel shows what a control fault looks like.

When to call a technician

Call if the breaker trips repeatedly, you see burning smells or damage, or the basic checks haven't helped. We handle dishwasher repair across Toronto and the GTA. If the machine is older and the fault is a control board, our guide on repair or replace and appliance repair cost can help you decide.

Rather have a pro handle it?

Our technicians repair this across Toronto and the GTA — same-day in many cases, with clear pricing and a warranty on the work.

Frequently Asked Questions

Why won't my dishwasher turn on at all?+
Check the breaker first, then make sure the door is fully latched. If it still has no lights, a faulty door latch switch, a blown thermal fuse or a control board fault is the likely cause.
My dishwasher has lights but won't start. What's wrong?+
Check whether the control lock or a delay start is on, and that the door latches fully. If neither applies, the control board or latch switch may not be sending the start signal.
How do I reset a dishwasher that won't start?+
Many dishwashers reset if you switch the breaker off for a minute and back on. Some have a button-based reset. Your manual will list the right one for your model.
Can I replace a dishwasher control board myself?+
It's possible on some models, but the board is also easy to misdiagnose. We recommend having the fault confirmed first, since replacing a good board is an expensive mistake.