Washer Guide

Samsung Washer Error Codes: What They Mean and What to Do

Samsung washers show short codes when they detect a problem, and the same code can mean different things on different models. This guide covers the common ones and what to try first.

Always check your model's manual if the meaning matters. Several codes vary between front-loaders and top-loaders, and between model years.

Quick reference: common Samsung codes

  • 5C (sometimes 5E): drain problem. The washer isn't pumping water out properly.
  • 4C: water supply problem. The washer isn't getting enough water.
  • SUd: too many suds. The washer pauses to let the suds settle. Samsung says it doesn't mean service is needed.
  • dC: depends on the model. On some it's an unbalanced load, on others a door error. Check the manual.
  • LC: a water level or leakage code on some models. Check the base and hose connections.
  • UE, Ur and Ub: unbalanced load. See our Samsung UE error guide.
  • LE: a drain or water-level related code shared across LG and Samsung. See our LE error guide.

5C: drain problems and what to check

The machine isn't draining at the right speed, or at all. Most often the drain pump filter is blocked by coins, lint or small items, or the drain hose is kinked, blocked or set too high. Switch off, check the hose, and clean the drain pump filter, which is usually behind a small panel at the bottom front of a front-loader. If it's clear and the code returns, the pump may be failing. Our guide on a washer not spinning or draining goes further.

4C: water supply and inlet problems

The washer isn't receiving enough water. Check that both taps are fully open, the hoses aren't kinked or crushed and the mesh filters at the inlet aren't clogged. Shut off the water and disconnect the hoses before checking the screens. If water pressure is fine and the screens are clean, a failing inlet valve is the next suspect.

SUd: too many suds and how to fix it

Too much detergent, or detergent that isn't high-efficiency (HE), produces more suds than the washer can handle. The washer pauses to let them settle, then continues. Use the recommended HE detergent and the amount on the label. Using less rarely hurts the wash.

dC and LC: check your model

These two vary between models. On some Samsung washers dC means the load is unbalanced, on others it means a door problem. LC can point to low water level or to a leak. Look up the code in your manual or Samsung's support page for your exact model before assuming. If a leak is the cause, stop using the machine and see our guide on washing machine leaking water.

When a reset won't clear it

Switching the washer off at the breaker for a minute clears many one-off codes. If the same code returns after you've checked the obvious causes, the cause is probably a failing part, such as a drain pump, inlet valve, door lock or sensor, and it needs testing.

When to call a technician

Call if a code keeps returning after you've cleaned the filter, checked the hoses and reset the machine, or if there's any leaking water. We handle washer repair across Toronto and the GTA, including Samsung models. Our guide on repair or replace can help if the machine is older.

Rather have a pro handle it?

Our technicians repair this across Toronto and the GTA — same-day in many cases, with clear pricing and a warranty on the work.

Frequently Asked Questions

What does 5C mean on a Samsung washer?+
It's a drain error. The washer isn't pumping water out properly. Check the drain hose and clean the drain pump filter first.
What does 4C mean on a Samsung washer?+
A water supply error. The washer isn't getting enough water. Make sure the taps are open, the hoses are straight and the inlet filters are clean.
Does SUd mean my Samsung washer is broken?+
No. It means too many suds were detected and the washer is pausing to let them settle. Use HE detergent in the recommended amount.
Do Samsung error codes mean the same thing on every model?+
Not always. Codes such as dC and LC differ between models. Check your owner's manual or Samsung's support page for your model.